TURBRO FIRESIDE FS48, User Manual

Page: 8 / 38

Assembly
INSTALLATION WARNINGS
● The TV stand is heavy and should be assembled near its desired location.
●
It is recommended that two people move the fully-assembled TV stand to prevent injury.
● Make sure that the unit is installed so that any power cords are not compressed against or caught on the TV stand and that it has
an unobstructed path to a grounded power outlet.
BEFORE INSTALLATION
Open the unit and check carefully for visible damage. If you have any problems with installation, operation, missing parts, or other
damage, please contact the TURBRO customer service team. Do not dispose of packaging until you are satisfied with your fireplace.
Contact the TURBRO customer service team (support@turbro.com) before returning the unit.
Unpack the unit and confirm that you have all the hardware and parts listed. Assemble the unit on a carpeted floor or the empty box to
avoid any scratches.
Note: This TV stand uses cam bolts for assembly. During installation, do not fully tighten cam locks until you finish assembly. This will
help make assembly much easier.
A
B
8
8
STEP 1
Insert wooden dowels (B) and cam bolts (A) into the designated
holes on the base panel (13).
A
B
13