![background image](http://html1.mh-extra.com/html/turbotronic/tt-vs9/tt-vs9_manual_1181511005.webp)
5
Crevice Tool
For radiators, crevices, corners, base-boards and between cushions.
Floor Brush
For all kinds of flooring, including carpeted and tiled floors.
Operating Instructions
Caution:
The suction hole opening must be open and free of any obstructions at all times. Otherwise,
the motor will overheat and could become damaged.
Power switch
• push on the power switch to turn on the unit.
• push on the power switch again to turn off the unit.
Using the Unit as an Upright
•
Insert the extension tube into the hand vac.
•
Choose the appropriate accessory (crevice tool or floor brush) and attach it to suction hole opening
on the hand vac
Note:
You may choose not to attach the crevice tool or floor brush when operating as an upright.
•
Press on the power switch turn the unit on. When finished using the unit, press on the power
switch again to turn the unit off.
• When finished using the unit, wind the power cord around the cord winding hooks for easy
storage.
Using the Unit as a Hand Vacuum
• Disconnect the extension tube from the hand vac by handle release button and removing the
extension tube from the hand vac handle. Once the extension tube is removed, snap the handle port
shut.
Note:
You may choose to leave the crevice tool or floor brush attached to the hand vac when
operating as such.
• Press the
“1”
position on the On/Off power switch to turn the unit on. When finished using the unit,
press the “
0
” position on the On/Off power switch to turn the unit off.
Cleaning & Changing the Dust Cup Filter
Changing and Cleaning the Dust Cup Filter
In order to achieve the best performance, empty the dust cup container and clean the dust
cup filter after each use.
1.
To remove the dust cup container, press down on the dust cup container release button (Fig. 8)
and separate the dust cup container from the main unit.
2. Pull out the dust cup filter.
3. Empty the dust from the dust cup container.
4. Rinse the dust cup filter in cold water, and then let it air dry for
24 hours
before replacing it back in
the dust cup container.
Important Note:
DO NOT use a washing machine to clean the dust cup filter. Do not use a hair
dryer to dry it. AIR DRY ONLY.
Power switch