TurboStart SMARTCHARGER CHG25A User Manual Download Page 5

SMART

CHArGer

 generate a low DC voltage and high DC current to the battery being charged. 

Improper operation of the charger or misuse of the charger may cause damage to the charger or create 

hazardous conditions for the user.

     

WARNING: Explosion hazard

SMART

CHArGer

 are designed to charge 12V/14V/16V lead-acid batteries of all types. Do not attempt to use with 

batteries with voltages not matching the chargers specified voltage.

 

 

•  Do not use this product where there are flammable fumes or gases.

 

 

•  Do not use this product in an enclosure containing lead-acid batteries. These batteries vent explosive hydrogen gas, which can be  

 

  ignited by sparks from electrical connections.

 

 

•  Never attempt to charge a frozen battery.

 

 

•  Do not connect DC clamps to the carburetor, fuel lines, or sheet metal body parts.

     

WARNING: Shock hazard. Keep away from children.

 

 

•  Do not expose charger to water/rain or temperatures over 104 °F (40 °C).

 

 

•  Do not open the charger. There are no user serviceable parts inside the unit. For service see the Returns policy in the back of this guide.

 

 

•  Be sure AC and DC cords are not pinched or otherwise damaged by hoods, doors, or other moving engine components.

 

 

•  Observe battery polarity.

IMPORTANT:

  If this charger is to be used with a portable generator, it should be equipped with automatic voltage regulation to 

ensure consistent output of the product.

 

   WARNING: 

Heated surface-Ensure at least 2” (5 cm) air space is maintained on all sides of the charger.

      

CAUTION 

An extension cord should not be used unless absolutely necessary.  Do not use this product with an ungrounded extension 

cord. Use of an undersized extension cord will adversely affect the output of the product and could prove to be dangerous. If 

an extension cord must be used, make sure that pins on the plug of the extension cord are the same number, size and shape 

as those of the plug on the charger. TurboStart Batteries recommend a minimum of a 16AWG cord for lengths up to 50’ and a 

minimum of a 14AWG cord for lengths up to 100’. We do not recommend cords over 100’.   

Turbostart 

SMART

CHArGer 

USER GUIDE

Chapter 1

important safety 

instructions

2

Summary of Contents for SMARTCHARGER CHG25A

















Reviews: