background image

Quick Start Guide 

TCS-C ceiling series 

 

TCS-C series Quick Start Guide - Page - 4 

Technical Specifications 

 

TCS-C35T 

TCS-C50T 

Dimensions 

235mm (9.2”) dia x 112mm (4.4”) deep  
100mm (3.9”) minimum mounting depth 

268mm (10.5”)  dia x 83mm (3.3”) deep 
206mm (8.1”) minimum mounting depth 

Hole cut-out 

215mm (8.5”) 

240mm (9.5”) 

Net weight 

2.3kg (5.1lbs) 

3.4kg (7.5lbs) 

Components 

1 x 3.5” (89mm) LF driver 
1 x 1” (25mm) HF tweeter 

1 x 5” (127mm) LF driver 
1 x 1” (25mm) HF tweeter 

Frequency response 

100Hz – 20kHz ±4dB

 

75Hz 

 22kHz ±4dB 

Nominal dispersion 

150ºH x 150ºV @-6dB points 

180ºH x 180ºV @-6dB points 

Sensitivity 

85dB (half space), 1w @ 1m 

92dB (half space), 1w @ 1m 

Power handling 

30 watts r.m.s., 60 watts program 

75 watts r.m.s., 150 watts program 

Maximum SPL 

100dB continuous, 106dB peak 

110dB continuous, 116dB peak 

Transformer taps 

30W, 15W, 7.5W (100 volt line) 
30W, 15W, 7.5W, 3.75W (70 volt line) 

60W, 30W, 15W (100 volt line) 
60W, 30W, 15W, 7.5W (70 volt line) 

Nominal impedance 

16 ohms nominal (low impedance) 

16 ohms nominal (low impedance) 

Construction 

Paintable injection moulded ABS 

Paintable injection moulded ABS 

Grille 

Powder coated perforated steel backed 
with acoustic cloth 

Powder coated perforated steel backed 
with acoustic cloth 

Connector 

Phoenix 4-way connector 

Phoenix 4-way connector 

Protection 

Thermal fuse disconnects speaker from 
distributed system 

Thermal fuse disconnects speaker from 
distributed system 

Standards 

Conforms to BS5839 part 8 1988 and 
IEC/EN 60849 fire prevention 

Conforms to BS5839 part 8 1988 and 
IEC/EN 60849 fire prevention 

 

Spares and Accessories 

LS-50 

5” low frequency loudspeaker 

LS-35 

3.5” low frequency loudspeaker 

TW-52 

1” high frequency tweeter 

PX-TCS-C50T Passive 

crossover 

network 

PX-TCS-C35T Passive 

crossover 

network 

MG-C50 Metal 

grille 

MG-C35 Metal 

grille 

TCS-CTR 

Tile rail (supplied with TCS-C35T, optional for TCS-C50T) 

TCS-CCP35 

C plate for TCS-C35T (supplied with TCS-C35T) 

TCS-CCP50 

C plate for TCS-C50T (optional accessory for TCS-C50T) 

Turbosound Ltd., Star Road, West Sussex RH13 8RY, UK 
tel: +44 (0)1403 711447  fax: +44 (0)1403 710155  www.turbosound.com 
version 1.0  05/10 

Summary of Contents for TCS-C35T

Page 1: ...peaker Attachment screws Steel fire can Attachment screws TCS 35T TCS 50T Unpacking the TCS series loudspeaker After unpacking the unit please check carefully for damage If damage is found please notify your supplier at once You the consignee must instigate any claim Please retain all packaging in case of future re shipment System Requirements TCS C series ceiling loudspeakers are passive loudspea...

Page 2: ...circular cutter set the size listed below and pull the wiring through the hole TCS C35T cut out diameter is 215mm TCS C50T cut out diameter is 240mm 2 Connect the wiring to the removable connector A 4 way Phoenix style connector is supplied with the loudspeaker Strip the insulation back by 5mm 3 16 insert the bare ends of the wire into the connector do not tin the wire and screw down the hold down...

Page 3: ...sired level The selector is located on the front baffle and should be adjusted before fitting the grille In some installations it may be preferable to leave grilles off until final adjustment of the tap selectors has been completed for all loudspeakers 9 Apply the logo badge to the grille in the desired location if required and fit the loudspeaker grille by pressing the grille firmly into place un...

Page 4: ...nal low impedance 16 ohms nominal low impedance Construction Paintable injection moulded ABS Paintable injection moulded ABS Grille Powder coated perforated steel backed with acoustic cloth Powder coated perforated steel backed with acoustic cloth Connector Phoenix 4 way connector Phoenix 4 way connector Protection Thermal fuse disconnects speaker from distributed system Thermal fuse disconnects s...

Reviews: