user manual
QLight
series
MOUNTING AND FIXING
Rigging Hardware
A versatile range of mounting hardware is available that allows enclosures to be used in a variety
of ways, in either mobile applications or permanent installations.
A top hat stand type fitting is mounted in the base of both cabinets for use with 35mm diameter
loudspeaker stands with a load rating of at least 37kgs (82lbs).
An optional 35mm diameter straight pole used between these enclosures enables a minimum
footprint and ensures the correct vertical distance between cabinets.
RT-767 ring type flying points. Rigging points are
provided on the top and rear of the TQ-310 for use
with optional RT-767 rings, enabling it to be rigged
in permanent installations and for mobile
applications. Downward inclination of the enclosure
can be adjusted using the RT-767 rigging point on
the rear of the cabinet.
The TQ-310 can also be installed with M10
shoulder eyebolts in a horizontal orientation
using the M10 internal rigging points on the
side of the cabinet. In this case use the rear
RT-767 flypoint on the rear as a pull-back.
The SB-310 swivel bracket provides a means of wall
mounting the TQ-310 in either a horizontal or vertical
orientation. The swivel bracket is attached to the box
using the integral pole mount fitting at the bottom and
the M8 internal rigging point on the top of the cabinet.
TQ-300 series manual
page 10
