Turbosound Flex Array TFA-600HDP, User Manual

Page: 31 / 83

user manual
FLEX ARRAY
FLEX ARRAY user manual
Page 31
Flying and Stacking
Overview
To take full advantage of the extremely flexible properties of the Flex Array system, two
modes of rigging system have been developed and are both fully integrated into the
enclosure. The two rigging systems allow either line arrays or virtual point source clusters to
be assembled – intuitively, quickly and easily, and with an absolute minimum of additional
external parts to suit the coverage requirements of a huge variety of professional sound
reinforcement situations.
The flying systems are inherently safe, flexible, self-contained and simple to use. The load is
taken entirely through the flygear and not through the cabinet‟s woodwork. The rigging
design allows the creation of clusters and arrays that can be assembled quickly and with a
minimum number of crew, and with full control of the vertical angles between enclosures
and the overall cluster inclination.
Safety Notes on Rigging
The Turbosound rigging system has been designed and constructed to a high
standard of safety, and tested to the most demanding of specifications. In order
to ensure the highest safety standards, the information following on the
assembly and safe use of rigging accessories must be carefully understood and followed.
Only use Turbosound recommended rigging accessories, which are specifically designed for
their intended purpose. Do not use Turbosound rigging with other types or brands of
loudspeakers. This practice may compromise safety standards and Turbosound will not be
responsible for damage or injury so caused.
Do not modify the rigging accessories, or use them in any other way than that described in
this user manual. Rigging components supplied as part of a complete assembly are non-
interchangeable and must not be exchanged with the component parts of any other
assembly.
The component parts of a Turbosound rigging accessory must only be assembled using the
fasteners and methods of assembly recommended in this manual. The use of fasteners and
methods of assembly not specified or approved by Turbosound may result in an unsafe
rigging assembly. Welding, or any other means of permanently fixing rigging components to
each other or to cabinet fixing points, is not allowed.