background image

Quickstart Guide 

NuQ series 

 

NuQ Series Quickstart Guide v1.2 - Page - 3 

network protocol among the networked devices and is carried over CAT5-type cables. Minimum system requirements are: 

PC with Pentium processor, Windows NT, 2000, XP, or Vista, CD ROM drive or internet access, RS232 or USB port 

 RS232

:Connect your computer to the BvNet interface using 

a standard 9-pin serial cable

. External power is required for 

RS232 operation and this should be supplied by the Linea Research Accessory Power Supply 

 USB

: Connect your computer to the BvNet interface using a USB Type A to USB Type B cable. External power is not 

required when using USB 

 

Connect networked devices via RJ45 CAT5 cables 

 

Launch the TurboDrive™ software 

 

Application Authorisation: TurboDrive™ prompts for an Authorisation Code on the first launch which is PJLUWZ 

 

Select the 

COM port

 from Network > Com Port 

 

Click the 

Online

 toolbar button 

 

Click on one of the devices that appear in the tree view to 

Launch the panel

 

 

When the progress bar indicates 

ready, adjust

 the controls as required 

Please refer to the TurboDrive™ User Guide for further information on networking. 

Mounting and Fixing 

NuQ series two-way cabinets are equipped with pole mount sockets for portable use on 35mm speaker stands or poles. 
Bass cabinets are equipped with pole mount receptacles that allow two-way cabinets to be mounted at the correct height.  

NuQ series cabinets can be suspended in permanent installations using optional shoulder eyebolts coupled to the internal 
rigging points provided. To install using eyebolts, remove the appropriate countersunk screws and replace them with 
eyebolts, which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum 
room coverage. Cabinets may be hung upside down if required. 

Turbosound wall and ceiling brackets are optionally available for installing non-powered NuQ series cabinets. They are 
also compatible with OmniMount™ wall and ceiling brackets. Some examples are shown below. 

Model 

Wall Mount 

Flying Yokes 

Swivel 
brackets 

Swivel 
extenders 

OmniMount™ Eyebolts 

NuQ-6 n/a 

NuQ-FY6  NuQ-SB6 n/a 

n/a 

M8 

NuQ-8 WB-20B 

PB-55 

NuQ-FY8 NuQ-SB8 NuQ-SBE8 

20.5 

Series 

M10 

NuQ-10 WB-20B 

PB-55 

NuQ-FY10 NuQ-SB10 NuQ-SBE10 

60 

Series  M10 

NuQ-12 WB-55B 

PB-55 

NuQ-FY12 n/a 

n/a 

60 

Series  M10 

NuQ-15 WB-55B 

PB-55 

NuQ-FY15 n/a 

n/a 

120 

Series M10 

 

 

Reviews: