Turbolock TL117, Manual

Page: 28 / 36

28 TURBOLOCK TL117
Section 9
Resetting the Lock
• Resets cannot be reversed.
• Performing a reset will delete all passcodes, including the admin passcode and
app-generated temporary keypad passcodes. Any device paired/synced with the
TL117 will be removed.
• Once all passcodes are erased, only the default admin passcode can open the
lock.
• After a reset:
○ Admin passcode reverts to default: 123456.
○ Choose a new admin passcode immediately. See Section 6.1 Changing the Admin Passcode.
○
All digital keys and codes issued via the app will be erased. In order to restore app functionality, it must be paired with the
lock again. Refer to Section 8.2 Pairing to another smartphone .
Option 1
Step 1.
Press ‘ ’ on the keypad, enter the current admin passcode, then press ‘ ’ again. Voice navigation will guide you through
the process:
“To restore the default factory setting, please press 5.”
Step 2. Press ‘5’ followed by ‘ ’ before the lock’s backlight turns off. The TL117 will confirm “Restore factory settings,” then flash
three times. After the voice confirmation (“Success”), the TL117 is now reset.
Option 2
Step 1.
Remove the cover from the battery compartment at the back of the lock.
Step 2. Press and hold the little black button above the battery compartment for ~5 seconds. The TL117 will confirm “Restore
factory settings,” then flash three times. After the voice confirmation (“Success”), the TL117 is now reset.
Reset Button
Inside Section