10 TurboLock TL-400KBL
5 .2 Unlocking your Bike Lock
Using Keypad Passcodes
The following steps apply for unlocking the TL-400KBL are the same for the
admin passcode
and
user
passcodes
created by the admin. (see
Section 7 . Managing User Passcodes
for more details.)
Step 1 .
Press any key to wake the keypad. The keypad will beep (once) and light up.
Step 2 .
Enter the
keypad passcode
, then press the
unlock button
‘ ’.
The bike lock will beep (twice) and vibrate, indicating successful operation.
Step 3 .
Press and hold the
release button
and pull out the chain plug to open the lock completely.
If you have trouble pulling out the chain plug, first make sure the plug is completely perpendicular to
the lock and that the release button is fully depressed before attempting to pull out the chain plug.
Although pressing any key once will wake up the keypad, it’s best practices to always use the
lock
button
‘ ’ or
unlock button
‘ ’.
5 .3 Security Lock-Out
If you enter an incorrect passcode, the keypad will flash red twice and beep twice.
If you enter an incorrect passcode three times in a row, the TL-400KBL will enter Lock-Out Mode for 15
minutes. During this time, the lock is unusable.
