pg. 10
Replacing the Harmonica Body
Step 1: Place the assembly in your left hand (for right handed players). Holding
the lower lid between thumb and index finger, flip open the upper lid.
Step 2: Remove the harmonica body, noting the orientation: blow reeds on top.)
Step 3: Replace the harmonica body, close lid, and you’re good to go!
•
The ELX is designed to accept any Special-20 harmonica body. It
can also be used with similarly sized harmonicas, including Marine
Band, etc, but may require extra shims to assure a proper fit.
•
You can also purchase replacement harmonica bodies from
TurboHarp at a discount.
•
Technical Note: the spacing between the sensor and the reeds is critical to the proper
operation of the ELX. This gap has been adjusted at the factory using a “standard” harp
body. If, after replacing harp bodies you detect a change in the loudness of any of the
reeds, it might indicate incorrect gapping. And if this happens, please contact us for
instructions.