-11-
Revision 1/F3563
5. TROUBLE SHOOTING
FAULT
POSSIBLE CAUSE
REMEDY
THE OVEN DOES NOT
OPERATE / START
The mains isolating switch on
the wall, circuit breaker or fuses
are “off” at the power board.
The power switch on the oven is
off.
Incorrect electrical supply.
(Refer fault diagnosis 6.1.1)
Power switch on unit faulty.
(Refer fault diagnosis 6.1.1)
Turn on.
Depress switch. Switch will
illuminate.
Ensure electrical supply correct.
Replace.
(Refer service section 6.3.4)
FAN DOESN’T OPERATE
Door not closed.
Fan obstructed.
Door microswitch is out of
adjustment.
(Refer fault diagnosis 6.1.2)
Door microswitch faulty.
(Refer fault diagnosis 6.1.2)
Fan motor faulty.
(Refer fault diagnosis 6.1.2)
Motor timer faulty.
(Refer fault diagnosis 6.1.2)
Motor capacitor faulty.
(Refer fault diagnosis 6.1.2)
Wiring.
Close door.
Clear obstruction.
Adjust.
(Refer service section 6.4.2)
Replace.
(Refer service section 6.3.2)
Replace.
(Refer service section 6.3.11)
Replace.
(Refer service section 6.3.12)
Replace.
(Refer service section 6.3.13)
Check and tighten any loose
wiring.
FAN ONLY OPERATES IN
ONE DIRECTION
Motor timer faulty.
(Refer fault diagnosis 6.1.2)
Replace.
(Refer service section 6.3.13)
OVEN LIGHT NOT
ILLUMINATING - DOOR OPEN
OVEN LIGHT NOT
ILLUMINATING - DOOR
CLOSED
Blown bulb.
No power to light.
(Refer fault diagnosis 6.1.3)
Blown bulb.
Light switch faulty.
(Refer fault diagnosis 6.1.4)
Replace.
(Refer service section 6.3.1)
Correct fault.
Replace.
(Refer service section 6.3.1)
Replace.
(Refer service section 6.3.4)
WARNING: ALL INSTALLATION AND SERVICE REPAIR WORK MUST BE CARRIED
OUT BY QUALIFIED PERSONS ONLY.
