Operation - Manual Mode with Core Probe
12
Press key to turn control ON.
Press
MANUAL
to set the Manual Mode Parameters.
Oven
Pre-Heating
will occur automatically.
Connect the Core Probe to the connector on the lower
right side of the control panel.
Press to select either
Convection
or
+ Steam
Modes.
Press the number shown on the
+ Steam
Key to select
Moisture Level Screen.
Press to turn oven light On/Off.
Press to cool down oven.
Press to turn OFF controller.
2.
CONTROL
ON
Press to show HELP screen.
(All screens)
1.
CONTROL
OFF
Press to return to previous screen.
Heat ‘On’ symbol will illuminate when
oven is heating.
Moisture ‘On’ symbol will illuminate
when moisture mode is operating.
Core Temperature Probe symbol
will show if core temperature probe fitted.
Press to show HELP screen.
3.
CONVECTION
/
MOISTURE
MODE
Manual Mode - (Optional Core Probe)
HEAT OFF
HEAT ON
HEAT ON
HEAT ON
