turbofan E20M Series Installation And Operation Manual Download Page 8

Operation 

Description of Controls 

 

  Power ‘On’ Indicator Light. 

Indicator light illuminates when the ‘On’ / ‘Off’ - 
‘Temperature’ control is turned ‘On’. 

 

  ‘On’ - ‘Off’ and ‘Temperature Control’. 

Used to turn the oven ‘On’ / ‘Off’ and to select the 
oven temperature.  Also turns the oven interior light 
‘On’ / ‘Off’.  (Not E22M3). 
 

  Oven Heating Indicator Light. 

Indicator light i

lluminates when the elements are 

cycling ‘On’.  The oven heating indicator light will 
turn ‘Off’ when the oven is up to temperature. 

 

  Timer Control (60 Minute). 

Used to set the bake time.  At any stage, the time 
can be adjusted in either direction.  For settings less 
than 10 minutes, first set to a higher setting, then 
turn the timer down to the time required. 

 

  Time Up Indicator Light. 

Indicator light illuminates and the oven buzzer will 
sound when baking is complete. 

 

Using the Oven 

To Turn ‘On’ the Oven;- 

Rotate ‘Temperature’ Control 

(2) 

from the ‘Off’ position.  ‘Power On’ Indicator light 

(1)  

illuminates. 

 

To Set the Temperature;- 

Rotate ‘Temperature ’ Control 

(2) 

to the temperature required.  ‘Oven Heating’ indicator 

light 

(3)

 will remain ‘On’ until the oven is up to  

temperature. 

 

To Load the Oven;- 

open the oven door and load  

product.  Avoid delays in loading the oven as this will delay 
the oven’s temperature recovery. 

 

To Set the Timer;- 

Rotate the ‘Timer Control’ 

(4)

 to the 

required time. 

 

NOTE:  This oven can be used without using the 

‘Timer Control’, as it is purely a timer and does 
not control the baking operation of the oven. 

 

Time Up;- 

When the timer reaches 0 minutes the buzzer 

sounds and the ‘Time Up’ indicator light 

(5)

 illuminates.  

To cancel buzzer, turn Timer Control 

(4) 

to the ‘Off’  

position. 

 

To Turn ‘Off’ the Oven;- 

Rotate ‘Temperature’ Control 

(2)

 to ‘Off’ position.  ‘Power On’ light 

(1) 

will turn ‘Off’. 

Operation Guide 



Turbofan Ovens have been designed to provide simple operation. 



This oven is intended for use in a commercial kitchen and must only be put to the use for which it was intended,  i.e. 
cooking food product.  

To use this oven correctly please read the following sections carefully:- 

Oven Control Panel 

Some parts of this oven will become VERY 
HOT during use and could cause burns if 
touched accidentally. 

Caution 

Summary of Contents for E20M Series


















Reviews: