10
I M P O R T I N G / E X P O R T I N G A M E N U
Importing a Menu from a Smart Card
1. From the main ChefComm window, set the
New Menu Configuration
to the oven type that
matches the menu type (Figure 7, page 3).
2. Select
Oven > Data Transfer > Import from
Smart Card
(Figure 29).
3. Ensure the reader is connected to your computer
via USB.
4. Insert the smart card into the reader (Figure 30).
5. Click
OK
to begin the data transfer.
6. Click
OK
to acknowledge the import was
successful (Figure 31).
NOTE: If the import was unsuccessful, see page 16
for troubleshooting.
Exporting a Menu to a Smart Card
1. Create or open a menu (page 4).
2. Make sure the menu is selected, as indicated by
the purple title bar. Other open menus that are
not selected will have gray title bars (Figure 26,
page 8).
3. Select
Oven > Data Transfer > Export to Smart
Card
(Figure 32).
4. Ensure the reader is connected to your computer
via USB.
5. Insert the smart card into the reader (Figure 30).
6. Click
OK
to begin the data transfer.
7. Click
OK
to acknowledge that the export was
successful (Figure 31).
NOTE: If export was unsuccessful, see page 16 for
troubleshooting.
Exporting Oven Firmware Updates
ChefComm can export oven firmware updates to a
high-density smart card for i-Series and conveyor
ovens.
CAUTION: Before performing this procedure,
ensure the smart card being used is high-density
(at least 64K bytes). High-density cards obtained
from TurboChef (part number 103655) will be
gray in color.
NOTE: i-Series firmware updates require two files
that must be loaded to two separate high-density
smart cards.
Figure 29: Import Menu from Smart Card
Figure 30: Insert Smart Card into Reader
Figure 31: Data Transfer Complete
Figure 32: Export Menu to Smart Card
