TBS-201 Wireless Vehicle detector
6
Figure 3. Product appearance and label
Note: To restart or calibrate TBS-201, place the magnet in the groove at the top of the
device and stay for 1~5 seconds, then move away.
2. Drill hole
a. Mark the installation position
According to the design of parking space, select the installation position and mark the
position, provide a code for the parking space. Usually the device is installed in the middle
of the parking space. Shown as figure 4.
Figure 4. TBS-201 installation position
b. Drill a hole
Drill a hole at the marked position, pay attention to measure the hole depth so that
TBS-201 surface will be placed a bit lower low road surface. Shown as figure 5.
