Control Panel
USING THE HEATER CONTROL
Press the main power button to turn on the fireplace.
1. LCD Screen:
Displays information about the settings you are using.
2. Indicator Lights:
There are 3 indicator lights below the LCD screen -- red, green, and blue.
a. Red
- Indicates that the LCD screen is displaying the temperature in degrees Fahrenheit
.
b. Green -
Indicates that the LCD screen is displaying the temperature in degrees Celsius.
c. Blue -
Indicates that the timer function is in use.
3. Timer:
Controls the amount of time that the heater and/or flame effect will run before powering off. See section below
for more details.
4. Heater On/Off Control:
Controls how much heat is produced by the fireplace. Can be turned on/off independently from
the flame control. See section below for more details.
5. Flame Control:
Controls whether flames will be visible through the front glass. Can be turned on/off independently from
the heater control. See section below for more details.
6. Power Switch:
The power switch supplies power to all functions of the fireplace. This switch must be in the ON position
for any of the below functions to work.
1. Press the heater on/off button to turn on the heating function.
2. When the heater is on, long press the heater button for 5 seconds to enter the temperature setting adjustment. The
LCD screen will start flashing.
3. Press the heater button to cycle through the temperature level.
4. After choosing your heat level, wait for the LCD screen to flash 5 times. Your temperature is now set.
Note: The heater will automatically pause after reaching the set temperature in your room. If the heater control is set to “ON” the heater
will work nonstop until you shut it off manually.
