13
This table reflects head angle values and bottom bracket heights, as a result of different Flip Chip/head set cup(s) configurations.
Note that these are rounded values which vary slightly with frame size.
CHASSIS & COMPONENTS
FRAME CONSTRUCTION & MEASUREMENTS
• All frames are made from FACT
11m carbon with a full monocoque
front triangle; rear triangles are
full carbon, too
• `Full monocoque` means that the front
triangle is molded as one solid piece,
which makes it very stiff and light
• Rider First Engineering ensures all
Riders receive consistent handling
and comfort, regardless of frame size
• Each frame size has unique stiffness
targets optimized for tube length and
Rider size
• The full monocoque front triangle
achieves these stiffness targets
without excess material
FRAME MATERIALS
Post Mount 180
(180 mm rotors can be mounted w/o
adaptor, larger ones require one)
BRAKE MOUNTS
• Spacing: 148mm
• 12mm thru axle
• Thru axle length: 172mm
• Thru axle thread pitch 1.0
WHEEL SPACING
• Seat collar diameter: 38.6 mm
• Seat post: 34.9 mm
The seat tube is designed to allow for
as long seat posts as possible.
SEAT TUBE/SEAT POST
Applies to all frames.
• S2: 188 mm
• S3: 210 mm
• S4: 229 mm
• S5: 255 mm
SEATPOST
MAX. INSERTION DEPTH
• Easy routing: channels for shift
housing and brake hose are installed
in the chainstays, so that housing/
hose can be easily inserted at the
rear triangle
• The chainstay channels terminate
near the motor, where a cable channel
in the downtube carries the housing
to the top
• Housing/hoses are free at motor,
otherwise guided
FRAME CABLE ROUTING
• Min. 180 mm
• Max. 220 mm
MAX. ROTOR SIZE
