3
bottom of the case with the
tip of a pen or a paper
clip. This will clear all the
data and re-start the
Computer. If you need to
replace the battery, make a
note of your odometer
reading and wheel circum-
ference settings before
removing it. You can then
re-enter the data when you
restart the Computer.
FIGURE 3: BATTERY
INSTALLATION
Mounting the Turbo®
Sport:
The following 7 functions
are available on your
Turbo® Sport:
SPEED – Current Speed
AVSPD – Average speed
MXSPD – Maximum Speed
TRIP – Trip Distance
ODO – Odometer (total
distance)
ATM – Automatic
Start/Timer
CLOCK – Digital 12/24
Hour Clock
This computer
also features:
Wired speed sensing
Two function LCD Display
Second Wheel Option
Easy Calibration Mode
Water resistant housing
2 Year Warranty
THE FOLLOWING
ITEMS ARE INCLUDED
IN YOUR TURBO®
SPORT PACKAGE:
Turbo® Computer
CR-2032 Lithium Battery
(1)
Battery Door (1)
26.0mm mounting
bracket (1)
31.8mm mounting
bracket (1)
Wired Speed sensor (1)
Magnet with screw (1)
Adhesive backed
magnet (1)
Cable tie wraps (5)
Mounting bracket sizing
straps (3)
FIGURE 2
Battery Installation
and replacement-
Before using your Turbo®
Sport Computer you will
need to install the battery.
Turn the computer over so
the display is facing down-
ward. Use a coin to
unthread the battery cap
from the Computer. Install
the battery (model
CR2032, Specialized P/N
481-3004) with the posi-
tive pole (+) facing
upward. Carefully thread
the battery cap back onto
the case with a coin. (See
Figure 3) If, after battery
replacement, the LCD dis-
play is blank or shows
incomplete digits, turn the
Computer over and press
the “AC” button on the
2
FIGURE 2
Rubber O-ring
CR2032 battery
4 screws
Tightening
sequence
FIGURE 3
The Turbo® Sport wired
speed sensor can mount on
the right or the left side of
the fork blade. Use the
