Disassemble Handle & Install
INSTRUCTIONS MANUAL
www.turboracinghobby.com
Battery Installation
Using the AA batteries or NIMH batteries, when the voltage
is lower than 4.5V ±0.2, the buzzer sounds continuously,
and the LED should start flashing.
1. Remove the battery cover
from the transmitter.
2. Insert four new AA batteries
according to the polarity
markings on the battery holder.
3. Reinstall the battery cover.
WARNING: DO NOT ATTEMPT TO CHARGE NON-RECHARGEABLE
BATTERIES, YOU MAY CAUSE AN EXPLOSION.
WARNING: PLEASE DON'T RESERVE THE BATTERY,OR IT WILL
BURN OUT THE PCB
1.Press the button
2.take away the handle
3.press the button, install the handle
LCD Display
LCD Display
SEL
CH
CH3
Power
Disassemble key
FUNCTIONS LCD
Multifunction Red Indicator LED
Steering
wheel
ST TRIM
TH TRIM
Switch for Channel 3
Throttle trigger
Antenna
+/- button
