CHARGING THE LITHIUM BATTERY:
The battery should be fully charged, when using for the first time and whenever it fails to
operate while in use. If you do not charge fully, you may not have sufficient power. After
using the product for a long period of time, or after a long storage, it is best to fully charge
the battery, to attain full capacity. The lithium battery does not need to be charged after a
short use, as it will not lose any memory.
The battery may become warm while charging; this is normal and does not indicate a
problem. The battery does not need to be removed from the product when charging. Your
battery can be fully charged for the first time in approximately 3 to 5 hours. Be sure to read
all safety instructions before using your adapter.
The adapter must be serviced at an authorized service center only. This is required to avoid
damage to static sensitive internal components. Read all of the instructions before
attempting to charge the battery pack for your product. Always use the correct battery pack
(pack supplied with the product or a replacement pack exactly like it). Never install any
other battery pack as it could damage your tool and may create a hazard.
1 .Charging procedure:
The adapter requires no adjustment and is designed to be as easy to use as possible.
Simply place your battery pack plug from your adaptor and it will automatically charge the
pack.
(a)
Connect the output of adaptor to the input of battery.
(b)
Plug the adaptor into an appropriate AC power outlet.
If the Charger Red LED light is ON, this indicates it is still
charging the battery. If the Charger Green LED light is ON,
this indicates the battery is ready for use.
(c)
The battery pack will be fully charged in approximately 1 to 2
hours, after the initial charge. If the green light on the charger does not illuminate after
fully charging, this is perfectly normal. In some geographical
areas, circuits will never obtain 100% charge and then the
green light will not come on. Go ahead with the operation of
this product, as this does not affect the performance
.
Additional safety instructions for batteries and
chargers:
Batteries:
·Never attempt to open the battery case for any reason.
·
Do not expose or place the battery near water.
·Do not put the battery near any type of heat, as it could explode.
·Do not store in locations where the temperature may exceed 105°F.
·Do not leave the battery pack in the charger when the charging is finished, otherwise
battery leakage may occur.
·Charge the battery only at room temperature.
·Charge the battery only by using the charger provided with the product.
·Before charging, make sure that the battery is dry and clean.
·Use only the correct type of battery for the product
.
·When disposing of batteries follow the instructions given in the section "Protecting The
Environment".
·Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
·Carefully wipe the liquid off using a cloth. Avoid any skin contact.
