2
HOW TO INSTALL
In good ventilation.
• Place the refrigerator in well
ventilated area for better
cooling.
Install the refrigerator
indoor do not get unit wet.
• This unit is designed for
indoor usage only.
Ambient temperature
should be below 85°F.
Warmer temperature will
cause problems with
cooling efficiency.
Place the refrigerator on
hard and level floor.
• Unlevel floor may cause the
refrigerator to make noise.
Avoid places that are
exposed to smoke.
• The discoloring can occur to
the refrigerator.
Set the front of the
refrigerator a little bit
higher than back-side by
using adjustable feet to
drain the water away with
easily.
Put away heat source from
the refrigerator.
• High ambient temperature
will make cooling efficiency
lower.
Place the refrigerator in an
area with low moisture.
• Splashing water or a high
moisture area may cause
short circuit and make
rusting easier.
Adjust the temperature in
the refrigerator.
• Controller is attached to the
right to the upper.
• Set the temperature control at
normal position.
Set the front
side higher than
back side.
Install
at the degree
of 41~95¡F
TGM-50RS
TGM-72RS
