background image

9

Turbo Air

MANUFACTURING COMPANY

Turbo Air warrants to the original purchaser of every new Turbo Air refrigerated unit, the cabinet and all parts thereof, to be
free from defects in material or workmanship, under normal use and service, for a period of one (1) year from the date of
original installation or 15 months after shipment date from Turbo Air , whichever occurs first.
Any parts covered by this warranty that are examined and determined by Turbo Air to have been defective within one (1)
year of original installation or fifteen (15) months after shipment date from manufacturer, whichever occurs first, shall be
repaired or replaced as stated below. Turbo Air shall be deemed to have fully complied with its obligation under the
foregoing warranties by electing either one of the following procedures, at the sole discretion of Turbo Air.

1. Furnishing a replacement part, freight collect, in even exchange for the returned part, freight collect.
2. Receiving the defective part, freight collect; repairing it; and returning it, freight collect.

In addition to the (1) one year warranty stated above, Turbo Air warrants its hermetically and semi-hermetically sealed
compressor to be free from defects in both material and workmanship under normal use and service for a period of four (4)
additional years from the date of original installation but not to exceed five (5) years and three (3) months after shipment
from manufacturer.

Compressors determined by Turbo Air have been defective within this extended time period will, at Turbo Air’s option, be

either repaired or replaced with a compressor or compressor parts of similar design and capacity.

The four (4) year extended compressor warranty applies only to hermetically and semi-hermetically sealed parts of the

compressor and does not apply to any other parts or components, including, but not limited to, cabinet, paint finish,
temperature control, refrigerant, metering device, driers, motor starting equipment, fan assembly any other electrical
component, etc.

The four year compressor warranty detailed above will be voided if the following procedure is not carefully adhered to:

1. This system contains R134A (R404A) refrigerant and polyol ester lubricant. The polyol ester lubricant has rapid moisture

absorbing qualities. If long exposure to the ambient conditions occur, the lubricant must be removed and replaced with
new. Listed below are the approved lubricants for the Tecumseh compressors.

1. ICI-Emkarate RL 184
2. Emery-2927-A
3. Mobile Artic 22A

Failure to comply with recommended lubricant specification will void the compressor warranty.

2. Dryer replacement is very important and must be changed when a system is opened for servicing. Dryer must be used

with XH-9 desiccant.

3. Micron level vacuums must be achieved to insure low moisture levels in the system. 500 microns or lower must be

obtained.

(Name of your business)

(Address)

(City and State of Purchaser)

(Model No. of  Unit)

(Unit Serial Number)

(Compressor Serial Number)

This is to inform TURBO AIR MANUFACTURING COMMPANY that I,

(Signature of business owner)

have had the above TURBO AIR UNIT installed in my place of business

(Installation date)

The above warranties are in effect from this installation date, or 90 days after shipment from TURBO AIR, whichever comes first.

TURBO AIR MANUFACTURING COMPANY 1250 Victoria Street, Carson, CA 90746, U.S.A.

WARRANTY

REGISTRATION

CARD

MANUFACTURING COMPANY

MAIL CARD

IMMEDIATELY

This card must be

mailed immediately

after installation

date for warranty to

be in effect.

ONE YEAR WARRANTY

ADDITIONAL FOUR YEAR COMPRESSOR WARRANTY

134A  (404A) COMPRESSOR WARRANTY

Summary of Contents for JRF-19












Reviews: