6
USE & CAUTION
1. How to start
2. Regulate temperature
Plug the refrigerator on 115V exclusive socket.
After the refrigerator running, put hand on the air suction to confirm it is sufficient
cold. Then put th the cold box.
Normally put the controller at “MID” step. The evapo-
rator might be frosted if the controller is at the
“FREEZE” step and the refrigerator capability might
be decreased. The range of the controller is shoen,
which is divided into step of “ LOW, MID, HIGH AND
FREEZE”.
The temperature inside the refrigerator would go
down if you turn the knob clockwise, while the tem-
perature would go up if you turn it anti-clockwise.
It’s a referenced temperature only. The temperature
was also influenced by the ambinent temperature.
3. Rack
The rack is adjustable. Please do as follows when you want to adjust the rack.
- Take out the rack.
- Move the rack support on suitable height.
- Put the rack on the support.
- To get a even temperature between top and bottom please adjust the equal
height between each rack.
4. Cautions
Shorten the door opening time and reduced opening frequency are good to keep
a inside cold temperature of refrigerator.
Never block the air suction and outlet. Keep air circulation and refrigeration
capability. Do not make food fully because it will influence the cooling effect.
Adjust the height of rack for proper food storage.
Make sure the food temperature is down to room temperature before putting hot
food into the refrigerator. Indoor usage only never install this outdoor. It should
prohibit getting wet from the rain. Only profession personnel is allowed to repair
the damaged power cable by special tools.
Never touch compressor to avoid scald.
This equipment is intended for the storage and display such as non-potentially-
hazardous bottle, can, securely bagged products and securely wrapped in sealed
container only.
Step
Low
Mid
High
Freeze
Cabinet Temperature
6-12ºC/42.8-53.6ºF
5-11ºC/41-51.8ºF
4-10ºC/39.2-50ºF
3-9ºC/37.4-48.2ºF
