6
Function introduction
1. Standby
Insert the plug of air purifier into power source, the buzzer will ring, and all
the indicators will lighten. After three seconds, air purifier is in standby mode,
only "Power button" indicator lights up, the other icon lights do not
illuminate.
2. Power on
Press the top power button, all buttons light turn white.
3. Fan Speed
Press this
button to adjust the fan speed as desired:
"Sleep" - "Medium" - "High" - "Auto" *
* depending on the model
*Auto function is available for some models
Control panel description
NO.
Button
Function Description
1
Power Button
Turn on and off function
2
Fan speed
Press the wind speed button to adjust
"sleep" - "medium" - "high" - "auto" *
3
Filter replacement
Keep pressing for 5 seconds
to reset the filter.
4. Replace the filter
(replacement reminder)
To enable filter replacement reminder: When the air purifier is on, turn off and restart the
product, it will start a reverse countdown. When the filter has accumulated 2000 hours,
the indicator light for replacing the filter will light and a beep will sound. After replacing
the filter with a new one, hold for 5 seconds the filter icon , at the same time the
alarm will stop.
