8
5. Main Body
6. Flat Washer
7. Nut
8. Support Rod
C.
INSTALLATION
1.
Assembling Accessories
1.
Main Body
2.
Push Handle
3.
Stainless Steel Bolt
4.
Flat Washer
2.
Operating the device safely
•
Check the device after unpacking for any damage or scratches on it.
•
Place the unit on a firm, level surface in an area with at least 50cm of free space around it allow for
proper air circulation.
•
Do not operate in close proximity to walls, curtains, or other objects that may block inlet and outlet.
Keep the air inlet and outlet free of obstacles.
•
If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
•
Never install the unit where it could be subject to
：
•
Heat sources such as radiators, heat registers, stoves or other products that products that produce
heat.
•
Direct sunlight
•
Mechanical vibration or shock
•
Excessive dust
•
Lack of ventilation, such as cabinet or bookcase
•
Uneven surface
Install the unit in rooms which exceed 12 m².
Do not install the unit in a place where inflammable gas
may leak.
NOTE!
The manufacture may provide other suitable example or may provide additional
information about the refrigerant odour..
Summary of Contents for 5949096154288
Page 2: ......
Page 42: ...turbionaire com...
