LEADING JET TURBINE Co., Ltd. ATJ TURBINES
16
Aligning transmitter with ECU ( Learn R/C )
RE: below show old type GSU or new type System Analyzer the same
function
Turn on the 7.4V main engine battery power, then Transmitter and Receiver
power, you can view this screen changes to the first main monitor each 2
seconds pressing the second button from the left (Menu Up) the second
informative screen is shown. In
the first line you have the
measure of the pulse width
received from your RC system,
and the relative stick position.
Second line is show the voltage
of the battery and the software
version. If the current drawn from
the battery is higher than 0,5A,
then the ECU display the battery
voltage and the battery current in
Amp.
Next menu let you to choose in four submenus, selected by pressing the
button under of each option.
Start: Jump to the parameters
used on startup
Info: Information and test menus
Radio: Adjust the radio throws
Run: Set the parameters used
during engine run.
