![TUR Isoforce User Manual Download Page 2](http://html1.mh-extra.com/html/tur/isoforce/isoforce_user-manual_1180760002.webp)
5.2.1 User Manual Isoforce
REV 5
01st July 2014
page 2 von 77
TUR Therapietechnik GmbH | Grubenstr. 20 | 18055 Rostock | Germany
Considerations Before the first Use
Before you start working with Isoforce, please be sure that you have carefully read and considered the
following points.
The installation of the system has been performed by trained staff. You can check if your
supplier is part of our authorised world-wide network by browsing our web site:
www.iso-
force.com
.
Isoforce should be operated by users with sufficient professional expertise. Our system
demands apart from familiarisation with the positioning, knowledge of all the clinical
considerations, as well as the possible applications. In the current manual we offer all the basic
information, but you should seriously consider further reading, as well as attendance in the
seminars held by our company.
Ensure that there are not cables that could be stepped over.
Remove any strong electromagnetic sources (preferably out of the room), as the working
conditions of the electronic circuits could be affected. Sources such as mobile phones should
not be placed on the device, and the patients should not carry them on. However, mobile
phones don’t affect the operation of Iso-Force in distance more than 1m.
In the unlikely event of system failure, please contact immediately with the authorised supplier
of your district. Do not attempt any service action by yourselves.
Isoforce offers remote assistant both for technical, as well as for application issues. This
demands wireless internet connection and you are strongly advised to install one if not any
available.
Despite the detailed information about the testing and rehabilitation procedures performed with
Isoforce, one should keep in mind that every patient should be treated specifically for his/her
pathology. Therefore, you should also take into consideration the unique characteristics of your
patients.
The positioning suggestions, as well as the testing protocols are not obligatory to use. On the
other hand we would be happy to see our clients to expand the applications beyond our own
suggestions. Isoforce is a powerful tool that gives you all the resources to do so.
All the info presented here, is based on scientific proven evidence and on published data. We
would be happy to give you our bibliography.
Before putting the patient on, it is suggested that you have the system in the position appearing
in the photo 1.1. This position is called the initial position.
For technical, application and marketing support please address either to your authorised supplier or
contact Iso-Force personnel through one of the following ways
Via e-mail:
Please consider that apart from these general considerations, there are Attention notes marked
with the
symbol in the following paragraphs. Read carefully all of them.