Tunturi GO Bike R 30, User Manual

Page: 13 / 28

1 Pedal 9 Hand pulse sensor
2 Pedal strap 10 Handlebar
3 Main housing 11 Handlebar adjustment knob
4 Seat 12 Support foot
5 Seat adjustment knob 13 Transport wheel
6 Backrest 14 Console
7 Backrest inclination adjustment
knob 15 Console adjustment knob
8 Seat handlebar 16 Resistance adjustment knob
Fasteners (fig. C)
17 Carriage bolt (M8*55) 23 Bushing (D14.8*25)
18 Washer (D8*19) 24 Screw (M5*14)
19 Locknut (M8) 25 Screw (M8*16)
20 Allen bolt (M8*16) 26 Washer (D8*16)
21 Curved washer (D8*19) 27 Screw (M8*12)
22 Carriage bolt (M8*75)
Assembly (fig. D)
WARNING
– Assemble the equipment in the given order.
– Carry and move the equipment with at least two persons.
CAUTION
– Place the equipment on a firm, level surface.
– Place the equipment on a protective base to prevent damage to the
floor surface.
– Allow at least 100 cm of clearance around the equipment.
▪ Refer to the illustrations for the correct assembly of the equipment.
EN
B IKE R 30 13