Tunturi 17FTRN3000 User Manual Download

Page: 15 / 94

- Wear appropriate clothing and shoes�

- Keep clothing, jewellery and other objects away from the moving

parts�

- Make sure that only one person uses the equipment at a time� The

equipment must not be used by persons weighing more than 100
kg (220 lbs)�

- Do not open equipment without consulting your dealer�

Electrical safety

- Before use, always check that the mains voltage is the same as the

voltage on the rating plate of the equipment�

- Do not use an extension cable�

- Keep the mains cable away from heat, oil and sharp edges�

- Do not alter or modify the mains cable or the mains plug�

- Do not use the equipment if the mains cable or the mains plug

is damaged or defective� If the mains cable or the mains plug is
damaged or defective, contact your dealer�

- Always fully unwind the mains cable�

- Do not run the mains cable underneath the equipment� Do not run

the mains cable underneath a carpet� Do not place any objects on
the mains cable�

- Make sure that the mains cable does not hang over the edge of a

table�

- Make sure that the mains cable cannot be caught accidentally or

tripped over�

- Do not leave the equipment unattended when the mains plug is

inserted into the wall socket�

- Do not pull the mains cable to remove the mains plug from the wall

socket�

- Remove the mains plug from the wall socket when the equipment

is not in use, before assembly or disassembly and before cleaning
and maintenance�

⚠ CAUTION

• If voltage varies by ten percent (10%) or more, the performance

of your treadmill may be affected� Such conditions are not
covered under your warranty� If you suspect the voltage is low,
contact your local power company or a licensed electrician for
proper testing�

⚠ CAUTION

• Route the power mains cord away from any moving part of

the treadmill including the elevation mechanism and transport
wheels�

⚠ WARNING

• Never use water or any other liquid directly on or near the

equipment, but only via a damp cloth if moist is required to
clean the machine�

• Using liquid directly is harmful for the equipment’s components,

and may result in an electric shock caused by a short cut circuit�
This could result in serious personal injury or even death�

Grounding Instructions

This product must be grounded� If the treadmill’s electrical system
should malfunction or breakdown grounding provides a path of least
resistance for electric current, reducing the risk of electric shock� This
product is equipped with a cord having an equipment-grounding
plug� The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes
and ordinances�

⚠ WARNING

• Improper connection of the equipment-grounding conductor can

result in a risk of electric shock� Check with a qualified electrician
or serviceman if you are in doubt as to whether the product is
properly grounded� Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed
by a qualified electrician�

Assembly instructions

Description illustration A

The illustration shows what the trainer will looks like after the
assembly is completed�
You can use this as a reference during your assembly, but do follow
the assembly steps always in the correct sequence as showed in the
illustrations�

Description illustration B

The illustration shows what components and parts you should find
when un-boxing your product�

‼ NOTE

• Small parts can be hidden/ packed in hollow spaces in the

Styrofoam product protection

• If a part is missing, contact your dealer�

Description illustration C

The illustration shows the hardware kit that comes with your product�
The hardware kit contains bolts, washers, screws , nuts etc� and the
required tools to properly fit your trainer�

Description illustration D

The illustrations shows you in the correct following order how to
assembly your trainer best�

‼ NOTE

• Part numbers shown in the assembly steps are commencing with

the spare part drawing that can be found in the online version
user manual�

⚠ WARNING

• Assemble the equipment in the given order�
• Carry and move the equipment with at least two persons�

⚠ CAUTION

• Place the equipment on a firm, level surface�
• Place the equipment on a protective base to prevent damage to

the floor surface�

• Allow at least 100 cm of clearance around the equipment�
• Refer to the illustrations for the correct assembly of the

equipment�