Page
11
of
24
V3.6
Simulating a fall in active mode.
Simulating a fall can also be achieved when the Vibby is in Active
Mode by the following below steps.
1. Fasten the wrist strap and hold the wrist strap with the Vibby
facing down and at a minimum of 60cm above the ground.
2. Hold in this position for at least 30 seconds.
3. Drop the Vibby avoiding it twisting so that it lands on its face on
the floor.
4. Leave it on the floor for at least 20 seconds whilst it analyses the
fall.
5. Once the fall has been detected the red LED will illuminate and
the vibrations will begin.
6. Leave the Vibby on the floor and after a further period (20-30
seconds) the Vibby will transmit the alarm; indicated by the red
LED illuminating for a short period.
Note:
The Vibby is designed to minimise false alerts and
therefore the above steps may not trigger an alarm 100% of
the time.
