-9-
6. Bluetooth playback
Before transmission between your Bluetooth device and the radio is possible, both devices
must be coupled. This process is called "pairing". The Tuner is served as a receiver, to receive
music stream to play on the Tuner.
If you have already paired a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth operation has been selected on
the radio. "Pairing" does not have to be repeated. This function may need to be activated in
your Bluetooth device, however.
• Push the Menu button to display the selection menu for the different playback modes.
• Use the up / down button to select the playback mode Bluetooth and push the dial switch.
• Switch your Bluetooth device to which you want to connect the radio on and activate the
pairing mode here. The device scans for Bluetooth devices in the reception range.
• When the radio is found, your bluetooth device shows its name TUN01-L-XXXX (the XXXX is an
identification code for your radio unit).
• Select the radio at your BT device.
• Start playback on your BT device.
• Playback now takes place using the radio.
7. Alarm Setting
• Choose
Alarm
from the main menu or press the
[Alarm]
button on the remote control.
• Select either Alarm 1 or Alarm 2, choose
Turn on
to activate the Alarm.
• Follow the alarm wizard instructions to set the alarm.
• The wizard will guide you through the settings below:
Time
- Set the time for the alarm
Sound
- You can choose
Wake to My Favourite, Tone
as the alarm source.
Wake to My Favourite - Please preset your favorite station before setting this as
the alarm source.
Repeat
-You can schedule the alarm as you desire —Everyday, Once or multiple days.
Alarm Volume
- Adjust the volume of the alarm as you like by rotating the
[Tune/Select]
knob
on main unit
or
[
▲
/
▼
]
button on remote.
•
After the above settings are completed, press the
[◄]
button to exit and make sure the Alarm
is turned on. You will see the Alarm icon appeared on the display if it is activated.
8. Sleep Timer Setting
You can set the timer to let the radio goes standby after the selected time elapsed in the range
of 15 minutes to 180 minutes.
Press
[Sleep]
button on the remote control to set the timer.
You will see the icon appeared on the display if the timer is set.
Sleep Timer
Alarm 1 + 2 Play
or STOP
08:30 am
Radio Paloma Live
1/99 3
:
18>
T
Letzte Schmetterling
(
Fly Away
)
Summary of Contents for WS161
Page 18: ... 16 Connection diagram ...