background image

Limited Warranty

Silicon Valley Global warrants that this product shall be free from defects in material, 

workmanship and assembly, under normal use, in accordance with the specifications and 

warnings, for 90 days from the date of your purchase of this product. This warranty extends 

only to the original purchaser of this product and is not transferable. To exercise your rights 

under this warranty, you must provide proof of purchase in the form of an original sales 

receipt that shows the product name and the date of purchase. For customer support or to 

obtain warranty service, contact [email protected]. THERE ARE NO OTHER EXPRESS OR 

IMPLIED WARRANTIES. Silicon Valley Global’s liability to repair or, at its sole option, replacement 

of the product. Incidental, special and consequential damages are disclaimed where permit-

ted by law. This warranty gives you specific legal rights. You may also have other rights that 

vary from state to state.

Silicon Valley Global assumes no liability for any accident, injury, death, loss or other claim 

related to or resulting from the use of this product. In no event shall Silicon Valley Global 

be liable for incidental or consequential damages relating to or resulting from the use of 

this product or any of its parts.

www.tunebug.com

© 2010 Silicon Valley Global LLC. All rights reserved.               and SurfaceSound are trade-

marks of New Transducers Limited. The Bluetooth

®

 word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such marks by Tunebug is under license.

Summary of Contents for T100

















Reviews: