FIGURE 9
Care
19
18
How to Reset
Care
The following instructions will assist in extending the life of your TuneAmp
pSAp.
Cleaning the Exterior
You should inspect and clean your TuneAmp every day. To clean, gently
wipe the surface with a soft, dry cloth or moist cleaning wipes made
especially for pSAps. Do not allow water or liquid to enter any
openings.
Cleaning the Tip and Tube
Remove the tube from the case by
twisting the tube connector at least
45° and pulling it straight off
, away
from the instrument.
(FIguRe 9)
use a tissue to clean the exterior of
the tube and tip. use the cleaning
line provided to clean the tube and
tip, by pushing the cleaning line
through the tube.
How to Reset (both models)
After wearing TuneAmp for a while, you may decide you want to try a
different Listening preference than the one you initially selected.
TuneAmp may be reset by following these simple steps:
1
With a battery inserted, open the battery door.
2
Press and hold
the upper or lower portion of the rocker switch.
3
While still
pressing and holding the rocker switch, close the
battery door
.
4
Wait at least15 seconds
, then release the rocker switch.
5
Open the battery door.
6
When you close the battery door again, TuneAmp is reset.
You may now proceed to select a new Listening preference.
See page 13 for Basic model or page 15 for Focus model.
