4
USER MANUAL
TUNJKTRLY02
2. SPECIFICATIONS
Model Number
TUNJKTRLY02
Maximum Load:
2 Tonne
Minimum Height:
80mm
Maximum Height:
795mm
Length:
950mm
Weight (NW/GW):
52kg / 57kg
3. DESCRIPTION
High lift jack arm with incredible low access height of just 80mm. Fitted with quick lift foot pedal and dead man's control.
Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy access to deep set jacking points.
Fitted with one-piece hydraulic unit with built-in safety overload protection. Features include:
•
Lifting range of 80mm - 795mm
•
Manufactured from heavy-duty steel for strength and durability
•
Twin pump
•
Quick lift
•
Extra long & low profile
4. ASSEMBLY
Loosen locating bolt at the side of the handle base. Push handle into socket and re-tighten locating bolt,
ensuring that it fits correctly in the groove.
•
Before using the jack for the first time, purge the hydraulic circuit in order to eliminate any air in the system. To do so, pull the
handle upward and turn it anti-clockwise to open the release valve. Hold the handle in the open position and pump it up and down
7 or 8 times. To close the hydraulic valve turn the handle clockwise and push down.
•
Place a few drops of hydraulic jack oil on the pump piston and pump the handle several times to distribute the oil.
•
Thoroughly lubricate all moving parts.
5. OPERATING INSTRUCTIONS
WARNING! Ensure you prepare vehicle and use jack according to Section 1 SAFETY INSTRUCTIONS.
Check that the supporting ground upon which the jack will stand is level and solid and not tarmacadam.
•
Position the jack saddle under the vehicle manufacturer's recommended lifting point (see vehicle handbook).
•
Ensure the release valve is closed (i.e. the handle is pushed down and turned fully clockwise). Commence pumping
the handle, or the foot pedal, using the full stroke, until the vehicle reaches the working height.
•
Should the jack become overloaded, a safety excess pressure valve will open and stop the vehicle from lifting.
•
Position axle stands under the vehicle before attempting any work.
Lowering the load
•
Pull the handle up and turn it anti-clockwise to open the valve and lower the load.
•
The lowering speed is controlled and constant regardless of how much you turn the handle.
WARNING! Ensure that there are no persons or obstacles beneath the vehicle, or in the path of descent.
