①
The nosecone and accessories.
②
Place the hub with blades onto the rotor shaft
③
Fully tighten the nut to 500N.m
and “spin” it completely onto the turbine alternator shaft,
then place in sequence of flat washer, spring washer and nut.
④
Snap the nosecone into position over the
⑤
After installation tug on the nosecone to
⑥
Completed assembly.
outside edges of the blade hub and tighten by
make sure it is securely attached and turn
screws to 7 N.m
the blades to make sure it is not rubbing
against the front cover of the generator.
16
