5
1. SAFETY INSTRUCTIONS
All persons operating, servicing or repairing the machine must be thoroughly familiarised
with the instructions of this manual and with the machine itself before starting work.
It is strictly forbidden to allow access to the machine to persons that are unfamiliar with
its operation and safety hazards.
It is strictly forbidden to go beneath the cultivator or cultivator parts whenever the unit is
not mechanically supported. Machine must always be supported if it or part of it must be
lifted up during maintenance.
Ensure that all pins and cotters are on their places and in good condition.
Standing or sitting on the cultivator, or carrying out adjustments or repairs while the
cultivator is in motion is strictly forbidden. The tractor engine must be turned off during
maintenance and repair work.
Damaged hydraulic hoses and components must be replaced without delay. Tractor
hydraulic valves and connections must be leak-free and in good condition. Transportation
position of the machine is dependent on these.
Max. transport speed is 30 km/h.
Cultivator does not cause any substantial increase in the noise level at the driver's cabin.
Possible hearing protection required depends on the tractor noise level.
Use only manufacturer-approved accessories and equipment. The party carrying out
alterations which does not follow manufacturer's instructions is responsible for the
alterations and their consequences.
CultiPlus is intended to use with Tume CultiPack disc cultivator. Only CultiPack can be
used with seed drill.
If extra weights are needed, the only approved way is to add weight plates inside the
cultivator’s front beam.
When unhitching the machine from the tractor all hydraulically lifted elements must be
lowered down to ground. Make sure machine cannot move by itself.
