STEP 1 – Open box carefully and check to make sure all parts have arrived.
STEP 2 — The front of the Mini Trak will
contain the Tumbl Trak logo in the bottom
right corner. Flip the Mini Trak over. In the
back end opposite of the logo insert the
extensions into the two leg holes with the
larger holes for the D-2 spring knob facing
inwards. Insert the Snapper Pin through
the smaller bottom hole, securing the
extension to the Mini Trak.
Any questions or problems, please call Tumbl Trak at
(800) 331-4362
STEP 3 – Insert the longer Mini Trak
foot in the extension making sure the
holes line up with the D-2 spring knob
holes. Attach the D-1 knobs in the
lower hole facing the front of the Mini
Trak and tighten to secure the exten-
sion. Insert the longer D-2 spring knob
in the holes facing each other and turn
till tight. You will then be able to
loosen and pull on the knob to allow
the legs to slide up and down to
change the height.
STEP 4 – Locate the front of the Mini
Trak. Insert the shorter foot with the
smaller D-1 knob holes facing inwards.
Insert the Snapper Pin through the
smaller bottom hole, securing the leg to
the Mini Trak. Secure the legs by turning
the D-1 knobs tight.
Step 1
Step 1
Step 2
Step 3
Step 4
