19
ADJUSTABLE OIL BRAKE ASSEMBLY
1. Press the oil seal (16) into the brake
housing (12). Mount the brake
housing with six capscrews (2), using
gasket (22).
2. Install the key (15), inner race (6)
and clutch/driver assembly (8 and
10), onto worm shaft (57).
3. Install the retaining ring (13) into the
brake housing, then install the stator
plates (3) and friction discs (4) in the
correct stack up, as shown below.
4. Install the spring (5). Insert the
adjusting mechanism assembly
(items 9, 14, 26) into brake cover
(19).
5. Attach the brake cover (19) with
eight capscrews (1) and washers
(17), using gasket (11).
6. Fill gearbox and brake with proper
oil. Refer to winch maintenance
section of this manual for oil type and
amounts.
7. Adjust the brake using the procedure
on page 8 of this manual.
FOR CORRECT PART
SEQUENCE NUMBERS
REFER TO PAGE 29 FOR
ADJUSTABLE BRAKE
BILL OF MATERIAL
