Tula Half Buckle Carrier, Instruction Manual

Page: 8 / 20

5
set up cont.
Correct Positioning
The width of the panel should be determined by the individual baby’s comfort
and leg span. The ergonomically correct position for baby is to be positioned
with the base of the carrier supporting them from knee to knee, with their
knees slightly higher than their bottom in an “M” shaped position.
When choosing which seat width to use with your baby, choose the
width that supports their legs in an “M” shaped position with their legs
supported to the crease of the knee. If the edge of the panel rests on the
baby’s calves, rather than under the bend in their knees, then the width you
have chosen is too wide. Always ensure proper placement of baby in the
carrier including leg placement.
How to Adjust the Half Buckle Panel
HEIGHT:
The panel of the carrier is also adjustable in height. There are two height
positions – short and tall.
1. By cinching the webbing at the top of the panel down all the way, the
panel can be adjusted to its shortest position, suitable for newborns and
small babies weighting a minimum of 7lbs and minimum of 20cm in
length.
2. By releasing the webbing completely, the panel can be adjusted to its
tallest position, suitable for larger babies and toddlers.
3. Correct positioning: When determining which panel height to use with
your baby, choose a height that allows the baby’s face to be visible over
the top edge of the panel (see right).