Chapter 2 BIOS Description
31
9.1
Supervisor/User Password
These items show supervisor/user password installed or not.
9.2
BIOS Write Protection
Enable this item to protect system BIOS from viruses.
9.3
Change Supervisor Password
Press
“
Enter
”
to change the supervisor password. The access rights and
permissions associated with the Supervisor password are higher than those of a
regular User password. The Supervisor password can be used to start the
system or modify the CMOS settings.Enter your password, not exceeding 6
characters, then press <Enter>. The password you entered will replace any
previous password.If you do not want to set a password, just press <Enter>
when prompted to enter a password.
9.4
Boot Sector Virus Protection
This item allows to protect boot sector of hard disk from viruses. The default
value is
“
Disabled
”
.
10.Load Optimal Defaults
This menu can let you load the optimal defaults set by BIOS, which have set the
optimized performance parameters of system to improve the performances of
system components.You can select <OK> or <Cancel> and then press <Enter>
to load or not load the optimized defaults.
11.Save Changes and Exit
When you select this option and press <Enter>, the following message will
appear in the center of the screen:
Save configuration changes and exit setup?
Press <Yes> to save your changes in CMOS and exit the program; press
<Cancel> or <ESC> to return to the main menu.
12.Discard Changes and Exit
If you select this option and press <Enter>, the following message will appear
in the center of the screen:
Discard Changes and Exit setup?
Press <OK> to exit CMOS without saving your modifications; press <Cancel>
or <ESC> to return to the main menu.
文件使用
"pdfFactory"
试用版本创建
Æ
Æ
www.fineprint.com.cn
