10
Hold
To use the hold feature press the SET and ZERO keys at the
same time. Press both again to release the hold.
There are 4 different hold functions you can choose from in the
C11 parameter
1. Peak Hold: Grabs the highest weight (for materials testing, ie.
tension and pulling force)
● Press the HOLD key then add weight to the scale
● The indicator will show the highest weight it recorded and hold
it on the screen until a higher weight is placed on the scale
2. Manual Hold: Grabs the current weight and holds it so it will
not change/fluctuate
● While weighing, press HOLD and the indicator will hold the
current weight on the screen until HOLD is pressed again
3. Auto Hold: If the weight on the scale is above 20d (20 x
division) and is stable, the indicator will hold that weight on the
screen for 3 seconds then go back to general weighing
● Pressing the hold key is unnecessary, holding is done auto-
matically when the scale is stable
4. Average Hold: Used for animal weighing, the indicator will
display the average weight sampled from 3 seconds
● Add livestock to scale and press HOLD
● Indicator screen will show “
LOC
” for 3 seconds, then display
the average weight from those 3 seconds
● Press HOLD again to exit holding mode
● If your pallet jack has a printer and the weight on the scale
is stable press the SET key for 1 second to print the current
weight
Note: In tare mode the printer can not print if negative weight is
shown
Print Out Format:
NO.
003
(S/N)
net
6.00kg
(Net
weight)
tare
2.88kg
(Tare
weight)
gross
8.88kg
(Gross
weight)