Secure the Uprights to the TufBox
•
Using two Hex Head Bolts on each side, mount the right and left uprights to the TufBox (See diagram
below). Slide this assembly all the way to the back of the trunk.
Secure the TufBox to Vehicle
•
Position the cabinet assembly in line with the Insert that was installed in the trunk deck in Steps 1-3.
Place the spacer on top of the cabinet and from inside the cabinet, insert the washer and Hex Bolt through
the Insert and tighten (See Detail below).
1406 Fifth Street, SW • Canton, Ohio 44702 • USA
1-800-321-0870 • 330-452-9132 • Fax 330-452-2557
[email protected] • Tufloc.com