FIG. 17
Route the
Cable (#42)
through the openings of the
Front
Upright (#27)
, as shown above.
FIG. 18
Attach two Nylon Pulleys 4 1/2 Rd. (#13-Labeled C, E) to
the
Front Upright (#27)
, in the position as shown above, and secure
them into place using two Hex Head Cap Screws 3/8-16 X 2 1/2
(#21), four Flat Washers SAE 3/8” (#15), and two Nylon Insert Jam
Lock Nuts 3/8-16 (#19). Next, insert the
Cable (#42)
and a Nylon
Pulley 4 1/2” Rd. (#13-Labeled D) to the
Press Bar (#29)
pulley
bracket and secure the pulley into place using one Hex Head Cap
Screw 3/8-16 X 2 (#22), two Flat Washers SAE 3/8” (#15), and one
Nylon Insert Jam Lock Nut 3/8-16 (#19). Be sure the cable is routed
properly into the groove of the Nylon Pulleys.
FIG. 19
Route the
Cable (#42)
over a Nylon Pulley 4 1/2 Rd. (#13-
Labeled F) and attach the pulley to the
Top Pulley Assembly (#28)
using one Hex Head Cap Screw 3/8-16 X 2 1/2 (#21), two Flat Wash-
ers SAE 3/8” (#15), and one Nylon Insert Jam Lock Nut 3/8-16 (#19).
FIG. 20
Next, route the
Cable (#42)
down through the holes of the
Plastic Shroud Lid (#8) and the
Top Guide Rod Retainer (#4)
.
Owner’s Manual: Assembly Instructions
6
SP-404 Lat/Mid-Row
42
27
28
28
E
42
D
C
29
27
42
28
F
4
8
42
Summary of Contents for SP-404
Page 13: ...12 SP 404 Lat Mid Row N o t e s ...
Page 15: ...16 SP 404 Lat Mid Row ...
