- 16 -
ADJUSTING CASTER HEIGHT OR REPLACING
1.
Locate the caster wheel in the front of the wheelchair and
remove the screw nut and screw from the fork of the caster
wheel.
2.
After removing the screw, adjust the caster
wheel fork to the prefered height.
3.
Line up the caster wheel fork with
the caster wheel and reinsert the
screw, tightly sealing it with the
screw nut. Repeat on the other
side.
Note:
When rising the seat height,
replace the 6 inch front caster wheel
with the optional 8 inch front caster
wheel by following the previous
screw removal steps.
- 15 -
ADJUSTING REAR WHEEL FOR AMPUTEE
Note: This process adds 4” to the distance between the
front and rear wheel, increase stability to the base.
1.
Locate the quick release axle mounting plate on the main
frame of the wheelchair. Remove the two screws holding the
mounting plate to the frame.
2.
Flip the mounting plate facing back of the frame.
3.
Then replace the screws and tightly seal close with the
screw nuts and washers. Repeat on the other side and reinsert
the wheels into the knob.