Tonno Lock
INTRODUCTION
The Tonno Lock is now a standard feature included with all Tuff Tonneaus. The Tonno Lock is
situated at the front of the tonneau cover, so as not to impede the accessibility of the Tuff
Tonneau.
Fitting the lock is simple and only requires a small attachment on the inside edge of the tub
behind the cab. Together with a padlock, it provides you with an extremely effective theft
deterrent. The Tonno Lock is designed to suit all utes and prevent thieves stealing your Tuff
Tonneau, so you can continue to rely on the Tuff Tonneaus’ name to give you what you want in
a tonneau cover.
BASIC TOOLS REQUIRED
Rivet gun, Drill, Torch, Marking Pencil/Pen. You will need to buy a small Padlock- make sure
the padlock will go through the hole on the Tonno lock.
TONNO LOCK CONTENTS
2 X 4MM Aluminium rivets
1 x Black Tonno Lock bracket
FITTING TONNO LOCK
1. Attach the black lock bracket to the bracket on the tonneau with your padlock, and fit the
tarp.
2. Getting under the tarp with a torch, place the lock bracket against the body and mark
holes with a pen.
3. Remove tonneau and drill the marks with a 4 mm drill bit, place the lock bracket in
position and rivet.
Your Tuff Tonneau is now ready for work.
Tonno Lock is not supplied with the Blank Tonneau Covers
Summary of Contents for Bunji Ute
Page 2: ......