manualshive.com logo in svg

Tucker GTR SERIES, Assembly, Installation And Operating Instructions, Page: 24 / 24

Share
Download
Tucker GTR SERIES Assembly, Installation And Operating Instructions Download Page 24

24

WARRANTY

TUCKER GTR BARBECUE WARRANTY

WARRANTY PERIOD

NOT COVERED

CONDITIONS OF THIS WARRANTY

Stainless steel body
Gas manifold
Stainless steel burners
Cross lighting panel
Gas control valves
Flare Guards
Grease collection 

tray
Ignitions
All other parts

10 years
Lifetime
2 years
2 years
1 year
2 years
5 years

1 year
1 year

The warranty does not cover the purchaser or 

any other person for damage malfunction or 

loss due to the following:

• 

Lack of maintenance, abuse, neglect, 

misuse, accident, or improper installation of 

this appliance.

• 

Scratches, dents or discoloration caused by 

heat, abrasive or chemical cleaners.

• 

Damage due to grease or fat fires.

• 

Failure of burners and valves due to insect 

blockage.

• 

Distortion of flare guards.

• 

Surface rust.

• 

Cleaning and normal wear and tear.

• 

Unauthorized repairs during the warranty 

period. 

• 

Removal or re-installation costs.

SERVICE CALLS OF THE ABOVE NATURE ARE 

CHARGEABLE

1.  The appliance is delivered to TUCKER 

AUSTRALIA distributors service department 

or authorized service agent and freight 

charges both ways is to be paid by the 

owner. No liability is accepted for loss or 

damage during transit.

2.  The appliance is installed by a qualified 

person and operated and maintained in 

accordance with the instructions supplied. 

Repairs and service must be carried out by 

an authorized person.

3.  Installation must conform to the standards 

laid down by the local codes or, in the 

absence of local codes, with AGA code 

AG:601 AS:5601:2002

4.  No alterations or repairs are to be carried 

out without obtaining the distributors prior 

consent. Such repair or any replacement 

does not extend the warranty period.

5.  Proof of purchase together with this warranty 

must be provided to verify purchase date 

and establish the warranty period. Only 

the original purchaser is covered under this 

warranty.

6.  Where this warranty is inconsistent with any 

state laws, the rights of the purchaser shall 

prevail.

7.  Parts installed from other manufacturer’s 

products will nullify this warranty.

FOR YOUR RECORDS

Model:

Serial Number:

Retailer:

Purchase Date: 

Gas type: 

TUCKER AUSTRALIA PTY LTD.

138 Silverwater Road 

Silverwater NSW 2128 AUSTRALIA.

PHONE: (+612) 9748 8368

 FAX: (+612) 9748 8138

WEB SITE: www.tuckerbbq.com.au 

EMAIL: [email protected]

Summary of Contents for GTR SERIES

























Reviews:

No comments