Universal Key-Pad
TAP
F. Test Program
I. Off: Test function inactive.
II.
On: Test function active. Control will repeatedly and automatically command an opening. If any faults are found,
they will show on the display.
NOTE: If no faults are found, the door will repeatedly cycle open/close until the function is switched off again.
G. Exit
6. CLOCK
A. Sets the current day, time and date
7. TIMER
A. Off: Timer not activated
B. On: Timer is activated and functions according to the time bands set in the TIMER PROGRAMMING function.
NOTE: When the Timer is activated, a “T” appears at the side of the time showing in the display and the TAP will not
allow any operational selection. If power is lost and the battery is discharged, a flashing asterisk (*) appears in place
of the “T”, and the system automatically reverts to Off.
8. TIMER PROGRAMMING
A. Operation: Up to 5 different time bands can be created for each day of the week by setting a start time and a func-
tion for each band. When the TAP’s internal clock reaches the preset start time for a respective band, the associated
function starts and runs until the next band takes over. The TAP must remain connected at all times for this function
to work.
B. Select the day: Select the day(s) of the week to create the time band. If “all days” is selected, time band defined will
be applied to all days of the week.
8. Number value appears in display.
9. Press Up or Down arrows until the value 5 appears.
10.Press OK.
11. Press Down arrow until KEEP SETTINGS displays.
12. Press OK.
13. Select ON.
14. Press OK.
15. Press Down until EXIT displays.
16. Press OK.
PROGRAMMING EXAMPLE
Set OPENING SPEED to a value of 5 and choose to KEEP SETTINGS:
1. Press the down arrow until ADVANCED MENU appears in the
display.
2. Press OK 5 times to scroll past setting the PASSCODE (default is
000).
3. OPERATION appears in the display.
4. Press OK.
5. CLOSING SPEED displays.
6. Press Down arrow until OPENING SPEED displays.
7. Press OK.
E. Change password
I. Password-Password-Password-Password
C. Select the function: Set the function to be associated with time band. Refer to the table on the next page for availa-
ble selections:
RUN
DESCRIPTION
0
No Function
1
Automatic Bi-Directional Full Opening
2
Automatic 1-Way Full Opening
3
Automatic Bi-Directional Partial Opening
4
Automatic 1-Way Partial
5
Door Held Fully Open
6
Door Held Partially Open
7
Manual (Off)
8
Night Function
7. Once you are at the desired sub-sub-main menu item, press OK.
8. Once all settings within a main menu category are complete, press the Up or Down arrows to the EXIT option and then
press OK.
NOTE: Not all menu items have an EXIT option. In this case, simply press the Up or Down arrows to advance through
the remaining menu items.
PROGRAMMING
To begin programming, perform the following steps:
1. Press the Up or Down arrows to scroll to the desired main
menu item.
2. Once you are at the desired main menu item, press OK.
3. The sub-menu will appear.
4. Press the Up or Down arrows to arrive at the desired sub-
menu item.
5. Once you are at the desired sub-main menu item, press OK.
6. If there is a sub-sub-menu item available, again press the Up
or Down arrows to scroll to the desired sub-sub-menu item.
UP-DOWN-OK
BUTTONS
5
6
