3-2
Section 3: Setup -
TL60ECV
TL60ECV bale wrappers are shipped with the battery
disconnected for safety reasons.
1. Locate battery at middle right of balewrapper. See
Fig.1
.
2. Reconnect by simply bolting unhooked positive (+)
red cable to its matching battery terminal
(A)
.
3.
Confirm TL60ECV’s functions are working
properly. Refer to
Control Screen Operations,
Battery Hookup
A
9. Install right maintenance safety guard by bolting at
pivot point. Do not over tighten. See
Fig.3
.
10. Close right maintenance safety guard top slot over
safety guard mount hook.
11. Bolt rear of safety guard with bolts and lock nuts.
12. Install Dispatch Arm option, if applicable. Refer to
.
Fig .3
Fig .1
Summary of Contents for TL60ECV
