Tubeline BALE BOSS 1 20 Series, Operator'S Manual, Page: 16 / 72

Bale Processor Boss I - 20 Series - Section 5 - Functions & Adjustments 5-2
Flail Drum Guards Adjustment
Flail drum guards are a great way to restrict the amount of material that is feed through the flail drum.
However longer materials may be restricted too much and become entangled in the guards. Follow
these instructions to remove or change the spacing of the flail drum guards.
1. Remove nuts and bolts (A) from top and bottom
of gaurds.
2. Slide, or remove, guards
(B
) to desired locations.
3. Refasten nuts and bolts of top and bottom of
guards.
A
B
B
A
A
Flail Floor Adjustment
The floor beneath the flail drum can be lowered to allow
longer strand material to be fed out of the machine.
1. Pull lock pins
(A)
from upper pivot likages (both sides).
2. Pull pivot linkage handles
(B)
down to lower floor (both
sides).
3. Refasten lock pins through frame lugs to avoid losing
them.
4. Further adjustment can be made by unfastening nuts
and bolts
(C)
of lower pivot point which allows the
eyebolts (D) to turn.
5. Turn the eyebolts to adjust the amount the flail floor
lowers.
6. Refasten the nut and bolt through the eyebolt and flail
floor (both sides).
A
B
B
D
D
C
A