Tubble Kilo-w+s, Instruction Manual

Page: 11 / 46

8. FAQ
The device is not working:
Is it plugged into a power socket? Is there a power outage?
Is the home leakage switch or fuse cut off?
Does the filter replacing indicator keep flashing?
Poor performance:
Is there any dust in the surface of the primary filter?
Is there any obstacle blocking the air inlet/outlet?
Significant noise:
Is there anything stuck on the fan of the air outlet?
Is the device tilted?
Please set a lower grade of wind speed if the noise is too loud, or set
low grade of wind speed when using it in bedroom at night.
The device emits an unpleasant smell:
It is a normal phenomenon that the device emits the smell of plastic
when used for the first time.
The device will emit an unpleasant smell if the filter is dusty. In this
case, please clean or replace the filter.
If the device emits a burnt smell, please unplug the power socket and
contact the buyer.
The ‘replacing filter’ reminder is still flashing even after the filter has
been replaced:
Please press the Filter button for at least 7s to reset the device and
the life counter of the filter will start. 1.
2.
3.
4.
5.
Notice: If the above FAQ cannot solve the issue you might experience,
further maintenance might be needed. Please contact the supplier. Please
do not disassemble the device to maintain it by yourself.
11